Specifies the ARP link monitoring <time> in seconds.
The ARP monitor works by periodically checking the slave devices to determine
whether they have sent or received traffic recently (the precise criteria
depends upon the bonding mode, and the state of the slave). Regular traffic
is generated via ARP probes issued for the addresses specified by the
arp-monitor target option.
If ARP monitoring is used in an etherchannel compatible mode (modes
round-robin and xor-hash), the switch should be configured in a mode that
evenly distributes packets across all links. If the switch is configured to
distribute the packets in an XOR fashion, all replies from the ARP targets
will be received on the same link which could cause the other team members
A value of 0 disables ARP monitoring. The default value is 0.