1.2.1

VyOS 1.2.1 is a maintenance release made in April 2019.

Resolved issues

  • Package updates: kernel 4.19.32, open-vm-tools 10.3, latest Intel NIC drivers

  • T1326 The kernel now includes drivers for various USB serial adapters, which allows people to add a serial console to a machine without onboard RS232, or connect to something else from the router

  • The collection of network card firmware is now much more extensive

  • T1271 VRRP now correctly uses a virtual rather than physical MAC addresses in the RFC-compliant mode

  • T1330 DHCP WPAD URL option works correctly again

  • T1312 Many to many NAT rules now can use source/destination and translation networks of non-matching size. If 1:1 network bits translation is desired, it’s now users responsibility to check if prefix length matches.

  • T1290 IPv6 network prefix translation is fixed

  • T1308 Non-alphanumeric characters such as > can now be safely used in PPPoE passwords

  • T1305 show | commands no longer fails when a config section ends with a leaf node such as timezone in show system | commands

  • T1235 show | commands correctly works in config mode now

  • T1298 VTI is now compatible with the DHCP-interface IPsec option

  • T1277 show dhcp server statistics command was broken in latest Crux

  • T1261 An issue with TFTP server refusing to listen on addresses other than loopback was fixed

  • T1224 Template issue that might cause UDP broadcast relay fail to start is fixed

  • T1067 VXLAN value validation is improved

  • T1211 Blank hostnames in DHCP updates no longer can crash DNS forwarding

  • T1322 Correct configuration is now generated for DHCPv6 relays with more than one upstream interface

  • T1234 relay-agents-packets option works correctly now

  • T1231 Dynamic DNS data is now cleaned on configuration change

  • T1282 Remote Syslog can now use a fully qualified domain name

  • T1279 ACPI power off works again

  • T1247 Negation in WAN load balancing rules works again

  • T1218 FRR staticd now starts on boot correctly

  • T1296 The installer now correctly detects SD card devices

  • T1225 Wireguard peers can be disabled now

  • T1217 The issue with Wireguard interfaces impossible to delete is fixed

  • T1160 Unintended IPv6 access is fixed in SNMP configuration

  • T1060 It’s now possible to exclude hosts from the transparent web proxy

  • T484 An issue with rules impossible to delete from the zone-based firewall is fixed