Traffic Engineering

Traffic Engineering (TE) is possibility to send traffic from node to node using alternative path.

Common link parameters

Traffic Engineering parameters are used for both IS-IS and OSPF (not supported yet).

set protocols traffic-engineering admin-group <admin-group-name> bit-position <bit-position-value>

Create Administrative group and assosiate bit position with it. These groups can be used in the following commands.

<bit-position-value> can have value 0-31. There cannot be two groups with same bit position.

set protocols traffic-engineering interface <ifname> admin-group <admin-group-name>

Set administrative group for interface <ifname>. Multiple values can be provided.

set protocols traffic-engineering interface <ifname> max-bandwidth <max-bandwidth-value-mbps>

Set maximum bandwidth for interface <ifname>. Value given in Mbits per second.

set protocols traffic-engineering interface <ifname> max-reservable-bandwidth <max-reservable-bandwidth-value-mbps>

Set maximum reservable bandwidth for interface <ifname>. Value given in Mbits per second.

Traffic Engineering (TE) can be enabled and exported for IS-IS using the following commands:

set protocols isis traffic-engineering enable

Enable Traffic Engineering for IS-IS.

set protocols isis traffic-engineering export

Export Traffic Engineering data to neighbors.

set protocols isis traffic-engineering address <ipv4-address>

Configure IPv4 address for MPLS-TE.